Follow

What is the maximum length of NMEA 2000 cable that can be used to connect my device to a T-Connector

The maximum length of a NMEA 2000 cable that is used to connect any device or accessory to a T-Connector is 6 metres (20 feet).

If a 6 metre cable is not long enough to connect the device or accessory to the T-Connector, a longer NMEA 2000 backbone cable will need to be connected into the backbone of the NMEA 2000 network. This cable would be installed between two T-Connectors in the NMEA 2000 backbone. The distance between any two points on a NMEA 2000 network must not exceed 100 m (328ft).

Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request

Comments

Powered by Zendesk